Guide For Operation - Sharp FU-60SE Manuel D'utilisation

Masquer les pouces Voir aussi pour FU-60SE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 36

GUIDE FOR OPERATION

GUIDE FOR ODOR SENSOR
• In addition to odor such as cigarette smoke and pet odor, the odor sensor also responds to the
following.
• Insecticide, cosmetics, spray, alcohol.
• Sudden changes in temperature or humidity.
• When the unit is in automatic operation and cosmetics or the like are used in a closed room, it
is normal for the sensor to respond by increasing the air flow. If this is not desirable, change
the sensitivity of the sensor.
GUIDE FOR DUST SENSOR
• The dust sensor detects dust particles in room air, such as cigarette smoke and house dust.
• Compared with cigarette smoke, the amount of dust released when making your bed is so
small that it may not be detected by the dust sensor. Therefore, the amount of dust seen with
the eye may differ from the indication of the clean-sign lamp.
GUIDE FOR FILTER RESET BUTTON
• After replacing filters, make sure to connect the power plug to a wall outlet, and press the filter
Reset button on the main unit or on the remote control. The "BEEP" sound indicates that the
stored operating time has been reset.
If the filter lamp is lit at that time, it will now go off.
E-12

Publicité

Table des Matières
loading

Table des Matières