Nobles TIDY-VAC 3e Manuel De Fonctionnement page 7

Operating Machine:
1.
Turn the cord release latch (Fig. 1) and lift up the cord release handle (Fig.2) to remove the cord (Fig.3). Return the cord
release handle into position and turn the cord release latch to fix into position (Fig. 4 & 5). Always unwind the cord
completely before vacuuming. It is important to maintain the power cord in good condition.
2.
Plug the power cord into a 120V grounded electrical outlet (Fig.6).
3.
Push the on/off button to turn the machine on (Fig. 7) and start vacuuming (Fig.8).
4.
When using the machine on carpets press the rocker switch on the combination floor tool to raise the brushes (Fig. 9).
5.
When using the machine on hard floors press the rocker switch on the combination floor tool to lower the brushes (Fig.10).
3
6
7
Nobles Tidy-Vac 3e (11-2016)
1
4
8
English
2
5
9
10
EN
7