Lavor GV 1,8 M PLUS Mode D'emploi page 18

Refer to the National or Regional Laws relevant to
the elimination of industrial solid wastes and to-
xic and noxious wastes, when carrying out the
separating, recycling or dismantling operations
of the materials:
Sheaths, flexible pipes and plastic or non metallic
components, must be disassembled and disman-
tled separately; Pneumatic and electric compo-
nents such as valves, solenoid valves, pressure
regulators, switches, transformers , etc ., must be
disassembled to be used again, in case they are
still in good conditions or, if possible, overhauled
and recycled.
The housing and in any case all the metallic parts of
the machine must be disassembled and grouped
according to each type of material. The various
parts, thus obtained, can be demolished and mel-
ted, in order to recycle the material composing
the original machine.
Noxious-toxic products must be elimina-
ted in compliance with the National or
Regional Laws in force, through special
draining channels belonging to the Consortium spe-
cialised in the elimination of used oils.
GUARANTEE
The guarantee will not be considered valid if any
modifications, tampering or repairs have been
made on the machine without the manufacturer's
written authorisation. The machine is delivered
packed in a cardboard carton, and any interventions
made on the machine must be performed
exclusively by the manufacturer's assistance
service only. This guarantee is not applicable to
any faults or malfunction caused by accidents,
negligence, unreasonable use, incorrect use and/
or other reasons that are not caused by faults in
manufacturer's materials or labour. It is obbligatory
to use original spare parts.
All rights reserved.
The reproduction of this operating handbook,
although partially, under any form (print,
photocopies, microfilms or other means) as well as
its processing, reproduction or diffusion by means
of electronic systems is forbidden.
18