Introduction; Description Of The Elements - CEVIK PRO PE903XL Manuel De L'utilisateur

EN

INTRODUCTION.

We are grateful for the trust given to our Brand and we hope that the product you have just
bought will be very useful for you. This product has many characteristics that Will make your
job faster and easier. Concepts such as Safety, comfort and reliability have been identified as
priorities in product design.

DESCRIPTION OF THE ELEMENTS.

Picture of model PE904XL.
GENERAL SAFETY GUIDELINES.
WARNING: Read and understand this manual before using this product. Failure to do so
can result in serious injury.
The auto-darkening welding helmet PE903XL / PE904XL, is designed to protect eyes and face
from sparks, spatter and harmful radiation under normal conditions. It will not protect against
severe impact hazards, including fragmenting grinding disks.
WORKING AREA.
•
Keep working area clean and well lit. Cluttered areas and benches invites accidents.
•
Do not use welding helmet into explosive atmospheres or in the presence of
flammable liquids, gases or dust. Electric arc welding process generates sparks that
may cause fires.
•
Keep observers, childs and visitors away from working area. Distractions may cause a
loss of control.
ELECTRICAL SAFETY.
•
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges
and refrigerators, there is an increased risk of electrical shock.
SAVE THIS MANUAL.
17
A Arc sensors (4).
B Shade Number Control Knob.
C
Sensitivity control Knob.
Delay control Knob.
D
Shade scale switch.
E
F Mode selector: welding
(WELD) / grinding (GRIND).