Marshalltown SPIN SCREED SPNRSSA18V Mode D'emploi page 7

Step 1 You'll need: 12" Pipe Wrench, 9" Chain Clamp Vice
Grip, and a 5/16" Allen Wrench. Use the Chain Clamp Vice
Grip to hold the Pipe (Note: Do not attempt to or have a co-
worker hold the Pipe. You will not be able to produce enough
the torque necessary to tighten the Ends).
Step 3 – Use the Pipe Wrench to tighten the Live End (J)
(Note: the Live End should be secured very tightly). Make
sure it is lined up with the set screw opening.
Step 5 Insert the Dead End (I) into the Pipe.
WS2305
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
INSTALLING PIPE ENDS
Step 2 Insert the Live End (J) into the Pipe, make sure set
screw is removed.
Step 4 – Insert set screw and tighten using the 5/16" Allen
Wrench.
Step 6 - Use the Pipe Wrench to tighten the Dead End.
7 of 32