EN
USE AND MAINTENANCE
TRANSPORT
Given the type of device (helmet and visor) no particular instructions are necessary for its transport there are no
particular cares for the transport.
Spare visors should be transported in a cardboard box (in addition to the protective bag) that is sufficiently rigid
to ensure they do not get broken during transportation.
INSTRUCTIONS FOR USE
CORRECT POSITIONING OF THE HELMET
The helmet must be correctly worn so that it can protect the forehead without impeding any visibility (fig. 1 A).
Do not wear the helmet tilted too much toward to the back leaving the forehead exposed (fig. 1 B).
IMPORTANT: All adjustments made to the helmet in the following paragraphs of this manual should be
made while helmet is worn correctly; otherwise, the helmet may be improperly fitted. Adjustment in the
correct position allows the helmet to remain completely immobile during an accident.
FASTENING SYSTEM
FASTENING AND UNFASTENING OF BUCKLE
After wearing the helmet, make sure that the buckle is fastened correctly.