Use And Maintenance - SUOMY GT-R Instructions Pour L'utilisation

EN

USE AND MAINTENANCE

Only use original Suomy accessories and spare parts or those specifically indicated by Suomy for the specific
model: this is the only way to assure reliability, safety and compatibility with the helmet used.
The use of non original components and/or accessories make the warranty void (see warranty conditions) and
can affect the safety requirements.
MAINTENANCE
To clean the shell use water and mild soap; let the helmet dry at room temperature, never expose it to heat.
Cleaning the helmet with solvents, petrol by-products or chemical substances, applying stickers or painting the
helmet could affect the structure of the shell, thus affecting the safety features, even if the damage is not readily
visible. Do not apply stickers to, use petrol or other chemical solvents with this helmet.
When cleaning the removable fabric parts, hand wash with water at a low temperature using only mild soap.
Even if it is part of the helmet's removable elements, the fabric lining must never be immersed in water while it
is attached to the rigid or spongy inner padding.
In both cases, allow the treated parts to dry at room temperature away from sunlight and never expose them to
heat.
Periodically clean the restraint system with warm water and mild soap. Do not use solvents or chemical
detergents and do not lubricate.
Where applicable, clean the visor by rinsing with warm running water. Then wash using a mild liquid detergent
and then dry with a soft cloth. When cleaning the visor handle care should be taken to avoid damaging the
scratch-resistant coating.
Do not under any circumstances use solvents, alcohol, benzenes, thinner or abrasive powder. These materials are