Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Reversing Display:
1. When the white wire is connected to positive, the monitor automatically switches to CAM1. When
the white wire is activated, the monitor automatically switches to CAM1.
2. When the blue wire is connected to positive, the monitor automatically switches to CAM2. When
blue wire is activated, the monitor automatically switches to CAM2.
3. When the brown wire is connected to positive, the monitor automatically switches to CAM3
(back-up camera). The distancing grid will also be displayed.
4. When the green wire is connected to positive, the monitor automatically switches to CAM4. When
the green wire is activated, the monitor automatically switches to CAM4.
Bracket Installation:
Installation instruction of using U-support bracket
1. Select suitable position on vehicle and fix the U-support bracket with screws (Figure 4)
2. Fix the monitor to the U-support bracket with angle adjustment screws and adjust the view angle of the monitor (Figure 5)
3. Connect the monitor with the AV and power supply conversion cable (Figure 6)
920-5203-00 Rev. D
Figure 4
Figure 6
CAM1
CAM2
CAM4
Figure 5
Page 6 of 12
Publicité
Table des Matières
