Ecco Gemineye EC5605-WK Instructions D'installation page 10

• Firstly press SEL to choose the channel to be paired,
secondly press CH- to select PAIRING.
OPTION
LANG
SCALE
PAIRING
CAM1
CAM2
CAM3
CAM4
Press
• Long press the " PAIR" on the camera for 5 seconds
3. System: COLOR-SYS, HORIZONTAL, VERTICAL, ZOOM functions will display on the screen as illustrated below :
• Press CH- to select COLOR-SYS
SYSTEM
COLOR-SYS
HORIZONTAL
VERTICAL
ZOOM
Press
4. Auto Scan: AUTO SCAN, SCAN TIME, CAM1, CAM2, CAM3 and CAM4 options will display on the screen as illustrated below :
• Press CH- to select SCAN TIME
AUTO SCAN
AUTO SCAN
SCAN TIME
CAM1
CAM2
CAM3
CAM4
Press
920-5203-00 Rev. D
ENGLISH
ON
OFF
NORMAL
NORMAL
NORMAL
NORMAL
to select OFF/ON.
AUTO
16.9
to select PAL / AUTO / NTSC
OFF
6S
OFF
OFF
OFF
OFF
to select 6S~90S
• Turn on the PAIRING function, the screen will
display "PAIRING START". It counts down 50 seconds.
PAIRING START
• The screen shows "SAVE DATA" and picture, then
code matching succeeds.
SAVE DATA
If code matching doesn't complete in 50 seconds, the screen will
show "PAIRING FAIL" to tell you that code matching fails and you
need to try again.Other channels can be paired in the same way
above.
• Press CH- to select ZOOM
SYSTEM
COLOR-SYS
HORIZONTAL
VERTICAL
ZOOM
Press
50
PAL
16.9
to select 16:9 or 4:3
Page 10 of 12