TROUBLE SHOOTING
Problem
Machine does not work
Machine runs but does not
dehumidify
Reduced dehumidifier capacity
No air inlet
Loud Operation
Cautions: Switch off the unit and unplug it immediately if anything abnormal happens. Contact a qualified electrician.
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact you local government for information regarding the collection systems available.
Cause
Unit is not plugged in
Room temperature is <5°C or above 35°C
(<41°F, >95°F).
The humidity set point is 2% higher than ambient
humidity.
Filter mesh os jammed
Air-in and/or Air-out louvers jammed.
Filter mesh or air-in louver jammed.
Machine situated on an incline or decline slope
Filter mesh jammed.
Solution
Plug in the unit
To protect the machine, use it only when ambient
temperature is between 5 and 35 degrees.
Reset the humidity to a lower set point .
Clean the filter mesh
Clear the blockage of the Air-in and/or Air-out louvers.
Clean filter according to instructions or clean the louver
blockage
Move to a flat ground
Clean filter mesh according to instructions
15
RDHC-110