Switching On The Machine - Oce VARIOPRINT 5000 Stacker Manuel Opérateur

In addition to the control panel buttons there is also a Main Power switch and circuit breaker
located behind the right front door.
a) Pressing the main power switch powers on the stacker and puts it into the stand by
mode. The Power Switch illuminates and appropriate control panel lamps illuminate.
b) Circuit Breaker.
If a breaker is tripped (button popped out) switch off the stacker, press the button on
and power on again.
If the defect remains, call for Service Technician.
Operator Manual
Page 9 - 17

SWITCHING ON THE MACHINE

>
=
Initial issue: 01/03
Latest revision: