Chicco Rainbow Cube Manuel D'instructions page 6

SELECTING COLOURS AND PROJECTION MODES
Selecting Colours: Turn the half-circle dial switch to one of the 7 colours or to the
rainbow effect symbol (*) to project the selected colours within the room.
When the Rainbow effect is selected, the toy will automatically project all 7 col-
ours alternately (yellow, orange, pink, red, violet, blue and green).
Selecting Projection and/or Night Light mode: Turn the switch with the symbol of
the 3 projection effects and nightlight to start the selected light effects.
Simply rotate the cube to select the direction in which you want the lights to be
projected to create constantly new and colourful atmospheres in the room.
INSERTING/REPLACING THE REPLACEABLE BATTERIES
Warning!
Batteries must only be fitted/replaced by an adult.
To replace batteries:
• Use a screwdriver to loosen the two screws on the battery compartment cover
near the cuddly toy. Remove the battery compartment cover, remove the spent
batteries and fit the new batteries making sure they are fitted with their poles in
the right direction (as indicated on the product).
• Replace the cover and tighten the screw.
1. Always keep batteries and tools out of the reach of children.
2. Always remove spent batteries from the toy to avoid the danger of leakage from
the battery damaging the product.
3. If the batteries happen to leak liquid, replace them immediately, making sure
you clean the compartment beforehand; wash your hands thoroughly if you
come into contact with any such liquid.
4. Always remove the batteries if the product will not be used for a long period of
time
5. Only use alkaline batteries of the same type or equivalent to the type recom-
mended for the correct function of this product.
6. Never mix alkaline, standard (zinc-carbon) or rechargeable (nickel-cadmium)
batteries.
7. Never mix new and old batteries.
8. Do not burn or dispose of old batteries into the environment. Dispose of them
at an appropriate differentiated collection point.
9. Do not short-circuit the battery terminals.
6