Installing The Oven In The Cabinet - Dacor Heritage HWO127 Instructions D'installation

Junction box

Installing the Oven in the Cabinet

In installing the oven, take every precaution in view of its weight
(single oven: 220 lbs; double oven: 359 lbs.). Do not try to install
the oven singlehandedly.
WARNING–DAMAGE & INJURY
• Use the mounting screws so the oven stays immobile during use.
• Do not block the oven exhaust (oven bottom).
• Do not lift the oven by the grill or by the bottom edge.
1. Gripping the upper front edge of the oven chamber and the
bottom of the oven case side, lift and rest the oven on the
front edge of the cabinet mounting platform.
Grip point
Do not grip here!
2. Slide the oven into the cavity* until the rear edge of the oven
frame is flush with the cabinet face, and the oven is centered
within the cutout. (*Ensure the electrical conduit sldes into
place without kinking or pinching.)
Place the cable in the notch down the oven's right-rear cor-
ner or coiled atop the oven chassis. (Do not trap the cable
between the oven and rear wall.)
8
INSTALLATION INSTRUCTIONS
Incoming power
Wire nut
(4 places)
Red
White
Red
White
Green
Black
Green
Black
Conduit to oven
Grip point:
both sides
Separate 10 AWG
wire minimum
Clamp wire
tightly to pipe
3-Wire Connection with External Ground
3. Find the mounting holes in the trim on both sides of the oven.
(Single ovens have 2 holes per side; double ovens have 3
holes per side.)
4. With a 1/16" bit, drill pilot holes in the cabinet through each
the trim mounting hole.
5. (Without over-tightening) Install all provided #6 screws
through the oven trim into the cabinet to secure the oven.