Spot Shiatsu; Width Control; Heat Massage; Timer - Oregon Scientific WS912 Mode D'emploi

width of the rollers (Narrow, Mid or
Wide).
Rolling can be activated concurrently with
Heat program.
3D ROLLING
‡ Press the 3D ROLLING button
remote control.
‡ Rolling can be activated concurrently with
Heat programs.
Guide to Massage Modes and options:
Roller
Action Heat
width
Shiatsu - -
Narrow,
Rolling - Mid
or Wide
3D Rolling - -
4. Three massage zones to select with:
‡ Fullback
‡ Upper back
‡ Lower back
The LCD screen will display the information
accordingly.
NOTE
‡
When Shiatsu mode begins, the unit operates
VSHFL¿FDOO\ DW WKH RULJLQDO SRLQW ZKHQ D
massage zone is selected, the unit will work
on the chosen zone with upward and
downward motions.
The unit shuts
‡
approximately 15 or 20 minutes.

SPOT SHIATSU

After selected Shiatsu mode, press either UP /
DOWN button / to target the Shiatsu action
on one spot of you back. Adjust the mechanism
position by holding either button until the next
desired position has reached. The UP botton
will move the mechanism upward and the DOWN
button will move it downward.

WIDTH CONTROL

When entered the rolling mode, press WIDTH
button to adjust the width between the massage
nodes. With each pressing, the massage nodes
will move to the next available position (Narrow,
Mid or Wide).
NOTE
Width control does not work with Shiatsu
and 3D rolling.
HEAT MASSAGER
To initiate soothing heat, simply press the HEAT
button and the corresponding amber L.E.D. light
on the massage nodes will illuminate. Press the
button again to deselect and the corresponding
on the
Up / Default

Intensity

Down

Timer

- HI / LOW 15 mins
- - 15 mins
- - 15 mins
off automatically after
L.E.D. light will turn off.
NOTE
For your safety, soothing heat cannot be
turned on if no massage program is in operation.
TIMER
Press the TIMER button
minutes massage time. The screen will show
countdown of the timer.
NOTE
If no timer setting has been chosen the
unit shuts off automatically after approximately 15
minutes.
INTENSITY
Press INTENSITY button
increase the rotation speed of the unit nodes. The
display will show HI / LO IRU ¿YH VHFRQGV WKHQ
return to the countdown of the timer.
NOTE
Such option is not available to 3D rolling
and rolling.

DEMO mode

For a brief demonstration of the features of the 3D
Massage Seat, press and hold the SHIATSU and
ROLLING buttons
7KH XQLW ZLOO EULHÀ\ JR WKURXJK DOO WKH DYDLODEOH
features of the unit. The icons on the LCD
GLVSOD\ ZLOO ÀDVK VSRQWDQHRXVO\ WR LQGLFDWH WKH
corresponding function. Once completed, the unit
turns off automatically.

MAINTENANCE

STORING

Place the unit in its box or in a safe, dry, cool place.
Refrain from sharp edges or pointed objects that
might cut or puncture the fabric surface. To avoid
breakage, do not wrap the power cord around the
unit. Do not hang the unit by the power cord or the
cord of the remote control unit.

CLEANING

Unplug the unit and allow it to cool down before
cleaning. Clean only with a soft, slightly damp
sponge. Never allows water or any other liquids to
come into contact with the unit.
‡ Do not immerse in any liquid.
‡ Never use
gasoline, kerosene, glass / furniture polish or
paint thinner to clean.
‡ Do not remove or unzip the unit cover to clean
the internal parts.
Do not attempt to repair the 3D Massage Seat
with Heat. There are no user serviceable parts.
4
to select 15 / 20
to decrease or
+ together for 3 seconds.
abrasive cleaners, brushes,