Overview Massager - Oregon Scientific WS912 Mode D'emploi

pain could be a symptom of a more serious
condition.
• Do not use the unit on erupted, swollen,
disease, ulcer or varicose veins are present.
• Do not use this unit for more than 15 minutes
at a time. Allow 15 minutes rest before next
section. Extensive use could lead to the unit's
excessive heating and shorter life. Should this
occur, discontinue use and allow the unit to
cool before operating.
• The unit is equipped with overheating
protection circuit, if the power is cut-off, please
wait until the unit is cooled down.
• Do not use if you have diabetes, tuberculosis,
benign or malignant tumors, phlebitis and
thrombosis, or if you have poor circulation.
Consult a physician before using if you have
any kind of fungal infection, swelling, fracture
or persistent pain.
• To avoid the Velcro strapes damaging your
clothes, avoid using delicate fabrics or
knitwear when using this unit.
• If you are feeling drowsy, stop using the unit
and do not leave the unit operating when you
are sleeping.
• Ensure that your hands are dry when operating
the controls or removing the plug.
• Do not sit or stand on the massage unit (the
back part of the unit).
• Before unplugging, turn the unit off by slide the
controller to OFF position.
This unit is not intended for use by persons
•
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction
concerning use of the unit by a person
responsible for their safety.
•
Children should be supervised to ensure that
they do not play with the unit.
• The unit has a hot surface. Persons
insensitive to heat must be careful when using
the unit.
OVERVIEW
MASSAGER
1. 3D Massage nodes
2. Remote control with LCD display: To control
and monitor massage program and modes.
3. Remote control holder: Place the Remote
control in when not in use.
4. DC Jack: Socket for connecting to AC / DC
power adaptor.
5. Detachable seat.
6.
7.
6. Handle.
7. Chair belt: Secures the unit to a chair.
REMOTE CONTROL
1.
5.
4.
9.
10.
13.
1. POWER: Press to turn on / off the unit.
2. SCAN: Press to scan body height of the user
3. PROGRAM: Press to manually select the
desired program P1 / P2.
4. 3D SHIATSU MODE: Designated to release
muscle tension by moving the Shiatsu nodes
up and down at your back.
5.&6. SPOT SHIATSU UP
Allows you to target the massage to a
up or down.
7. 3D ROLLING MODE: The rolling motion
aims to loosen up muscles. With the 3D
function, the rollers follow the curves your
back intimately.
8. ROLLING WIDTH CONTROL: While in rolling
mode, press to adjust the width of the massager
nodes. With each press, the massage nodes
2
3.
2.
6.
. 7
8.
12.
11.
15.
14.
AND DOWN :