Functional Description - Renkforce 751242 Notice D'emploi

6. Functional Description

The product can activate a relay with special transponders and thus control, e.g, a
door opener.
Up to 50 transponders can be taught into the product and saved there.
If one of these transponders is recognised when recording and evaluating the transponder
data, the relay switches (NO contact, closer).
The switching time of the relay can be set (impulse operation 0.5 s or a switching time
of 1 - 15 s in steps of 1 s).
The user transponders that are to permit a switching process of the relay and thus, e.g.,
opening of a door, are taught in by master transponder in the EEPROM and saved.
The master transponder is any „normal" transponder that serves as master
transponder after actuating of a button on the PCB of the control module. A
detailed description of this process is given in chapter 10.
25