MSI B450 GAMING PLUS Manuel page 44

fIOMMU Mode (optional)
Enables/disables the IOMMU (I/O Memory Management Unit) for I/O Virtualization.
fSpread Spectrum (optional)
This function reduces the EMI (Electromagnetic Interference) generated by
modulating clock generator pulses.
[Enabled]
[Disabled]
Important
If you do not have any EMI problem, leave the setting at [Disabled] for optimal system
y
stability and performance. But if you are plagued by EMI, select the value of Spread
Spectrum for EMI reduction.
The greater the Spread Spectrum value is, the greater the EMI is reduced, and the
y
system will become less stable. For the most suitable Spread Spectrum value, please
consult your local EMI regulation.
Remember to disable Spread Spectrum if you are overclocking because even a
y
slight jitter can introduce a temporary boost in clock speed which may just cause your
overclocked processor to lock up.
fRelaxed EDC throttling [Auto] (optional)
Relaxed EDC throttling reduces the amount of time the processor will throttle the
cores.
[Auto]
[Enabled]
[Disabled]
fAMD Cool' n' Quiet [Enabled]
The Cool' n' Quiet technology can effectively and dynamically lower CPU speed and
power consumption.
fSVM Mode [Enabled]
Enables/ disables the AMD SVM (Secure Virtual Machine) Mode.
fBIOS PSP Support [Enabled] (optional)
Enables/ disables the BIOS PSP support. It manages PSP sub-items including all
C2P/P2C mailbox, Secure S3, fTPM support.
fPower Supply Idle Control [Auto] (optional)
It allows you to select the power-saving control mode for the CPU when all cores
are in a non-CO state. If set to Auto, BIOS will configure these settings.
fCPU VDD_SoC Current Optimization [Auto] (optional)
Sets the currents of CPU VDD and SoC. If set to Auto, BIOS will configure this
setting automatically.
[Auto]
[Custom Setting] Allows you to set the currents manually.
32
BIOS Setup
Enables the spread spectrum function to reduce the EMI
(Electromagnetic Interference) problem.
Enhances the overclocking ability of CPU Base clock.
AMD's recommendation
Reduce the amount of time the processor will throttle.
Part-specific EDC throttling protection enabled.
This setting will be configured automatically by BIOS.