Radio Reception; Wall Mounting - Hama DVB-T Mode D'emploi

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• DVB-T Indoor Antenna
• Base
• Adhesive pad
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• The product is intended for indoor use only.
• Use the product for its intended purpose only.
• Protect the product from dirt, moisture and overheating
and use it in dry rooms only.
• Children should be supervised to ensure that they do not
play with the device.
• Lay all cables so that they do not pose a tripping hazard.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to any
major shocks.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the device in any way. Doing so voids the
warranty.
Warning
• Do not attempt to service or repair the device
yourself. Leave any service work to
qualified experts.
• Do not open the device or continue to operate it if it
becomes damaged.
4
4. Specifications
Frequency band
Connection
Ambient temperature
5. Startup and Operation
5.1 Connection
• Connect the antenna cable to the TV set (Fig. 1a).
• If you're using an external DVB-T receiver, connect the
antenna to the DVB-T receiver. (Fig. 1b)
• Connect the DVB-T receiver to the TV (observe the
operating instructions for your set-top box).
• Setting up the antenna manually allows you to optimise
the reception of the TV stations you receive.
• Depending on the reception area, the stations may be
broadcast vertically or horizontally.
• The antenna must be positioned accordingly.
Note
This indoor antenna is passive. Ensure that the 5 V
power supply from the coaxial connection of the TV or
DVB-T receiver is not active.

5.2 Radio reception

• The antenna can also be used for FM reception.
• As most audio devices have an IEC connection, please
use a coax socket-coax socket adapter (not included).
Note
Please note that the number and quality of stations
received may vary depending on the position of the
antenna and local conditions.

5.3 Wall mounting

Use screws and wall anchors (not included in the delivery
package) to attach the bracket to the wall. Insert the
antenna into the slots provided.
Note
• Before mounting, check that the wall you have chosen
is suitable for the weight to be mounted Also make
sure that there are no electric, water, gas or other
lines running through the wall at the mounting site.
• After the product has been mounted, check that it
is sufficiently secure. You should repeat this check at
regular intervals.
47–230 / 470–862 MHz
Coax plug
-20 to +40° C