Hama DVB-T Mode D'emploi page 5

Masquer les pouces Voir aussi pour DVB-T:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
5. Startup and Operation
Warning
• Connect the product only to a socket that has been
approved for the device. The socket must be installed
close to the product and must be easily accessible.
• Disconnect the product from the network using the
power button – if this is not available, unplug the
power cord from the socket.
• When using a multi-socket power strip, make sure that
the sum power draw of all the connected devices does
not exceed its maximum throughput rating.
• If you will not be using the product for a long period of
time, disconnect it from mains power.
• Connect the antenna's power supply unit to a socket and
connect the antenna cable to the TV (Pic. 1a).
• If you're using an external DVB-T receiver, connect the
antenna to the socket and the DVB-T receiver (Pic. 1b).
• Connect the DVB-T receiver to the TV (observe the
operating instructions for your set-top box).
• Insert the base into the appropriate slots on the back of
the antenna (Pic. 2).
• Setting up the antenna manually allows you to optimize
the reception of the TV stations you receive.
• Depending on the reception area, the stations may be
broadcast vertically or horizontally.
• The antenna must be positioned accordingly.
• Switch off the antenna when it is not in use.
Radio reception:
• The antenna can also be used for FM reception.
• As most audio devices have an IEC connection, please
use a coax socket-coax socket adapter (not included).
Note
• Please note that the number and quality of stations
received may vary depending on the position of the
antenna and local conditions.
• If the connected DVB-T receiver supplies +5 V via the
antenna output, no power supply unit is required as
the antenna can be remotely powered by the antenna
connection.
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth
and do not use aggressive cleaning agents.
Note
Disconnect the device from the power supply before
cleaning it or if it is not going to be used for a long
period of time.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/
mounting, improper use of the product or from failure to
observe the operating instructions and/or safety notes.
8. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and
electronic devices as well as batteries must not be
disposed of with household waste. Consumers are obliged
by law to return electrical and electronic devices as well as
batteries at the end of their service lives to the public
collecting points set up for this purpose or point of sale.
Details to this are de ned by the national law of the
respective country. This symbol on the product, the
instruction manual or the package indicates that a product
is subject to these regulations. By recycling, reusing the
materials or other forms of utilising old devices/batteries,
you are making an important contribution to protecting our
environment.
9. Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the
radio equipment type [00121663] is in compliance
with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following
internet address:
www.hama.com -> 00121663 -> Downloads.
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

121663

Table des Matières