Ejecting A Disc Or Sd Memory Card; Selecting Usb Resources; Using The Aux Input - Toyota ICE Mode D'emploi

of a CD (music), an SD memory card or a USB device
Press 'Title' during playback to go back to the content menu of the CD, SD memory card or USB
device.
Note: In case of a connected 3rd party AUX- or USB device, please refer to the User's
Instructions of that device.

6.10. Ejecting a disc or SD memory card

Ejecting a disc is always possible. When ejecting while playback, the music track or movie will stop and
the disc will be ejected immediately.
An SD memory card can be taken out of the SD slot at any moment. Playback will stop when removing
the card.

6.11. Selecting USB resources

There are a number of different USB sources available when using the ICE system depending on the
configuration. Depending on the USB stick type, the USB source will automatically play if no disc is
inserted in the disc slot.
Note: Read the User's Instructions for the connected USB source. Since it is not possible to
operate all the USB options from the ICE system itself, you will need to use the remote
control.

6.12. Using the AUX input

ICE is equipped with an additional input for external sources.
To display the external source use a 3 male RCA wire to connect to the aux connection located at the
back of the central console box. Contact your authorized retailer if you cannot locate the aux
connectors.
When switching on the AUX device and when a disc, card or data carrier is inserted in that device, the
ICE monitor will automatically show the contence screen of that device.
If not, pressing 'Input' on the ICE remote control will cycle through the available inserted discs, SD
memory cards or connected USB or AUX devices to go eventually to that screen.
38