Operation; How To Start; Inserting Media - Toyota ICE Mode D'emploi

6. Operation

6.1. How to start

Monitor
Switch on the monitor by pressing the button under 'monitor' on the remote control or by pressing
the button on top of the monitor.
Mediaplayer
Switch on the mediaplayer by pressing the button under 'mediaplayer' on the remote control or
by pressing the button on the mediaplayer device.
Headphones
Switch on the headphones by turning both earpieces outward. When the earpieces are turned inward
again, the headphones will be switched off. A small LED located on top of the right earpiece will
indicate if the headphones are ON or OFF.
Caution: Don't forget to adjust the headphone channel to the appropriate monitor before
operation (see section 5.1.1. Setting up the channels for the IR headphones).

6.2. Inserting media

Disc media
Put a disc in the disc slot of the mediaplayer (for the location of the disc slot see section 4.1).
SD Memory Card
Put an SD memory card in the memory card slot of the mediaplayer (for the location of the memory
card slot see section 4.1).
USB Devices
Connect a suitable USB cable to the USB slot of the mediaplayer (for the location of the USB slot see
section 4.1).
A USB extension cable is provided in case the shape of your USB stick does not fit into the USB slot.
35