Pioneer ElitE SC-LX801 Mode D'emploi page 5

> Before start > Hookup
＊ 1: 30e 〜 55e, ＊ 2: 65e 〜 100e, ＊ 3: 125e 〜 150e
9 : Height Speakers
$
Top Front Speakers
$
Top Middle Speakers
$
Top Rear Speakers
> Setup > Playback
＊3
＊2
＊1
> Part Names
Height Speakers;
Ceiling Speakers
These are types of height speakers. Furthermore, by
installing height speakers, you can select the Dolby
Atmos listening mode, which realizes the most up-to-date
3D sound including overhead sounds, when the input
format is Dolby Atmos.
Fit top front speakers on the ceiling forward of the seating
position, top middle speakers on the ceiling directly above
the seating position, and top rear speakers on the ceiling
behind the seating position. The distance between each
pair should match the distance between the two front
speakers. Note that with height speakers you can install
up to two sets; Height 1 Speaker and Height 2 Speaker.
0 Dolby Laboratories recommends placing this type of
height speakers to obtain the best Dolby Atmos effect.
Go To "Hookup" (
En
P10)

5