Publicité
Les langues disponibles
Les langues disponibles
7200
To switch from one mode to the other, hold down both volume
control push-buttons
LED underneath starts flashing (for around 2 seconds) to indicate
entry into ADJUSTMENT mode. At this point, while the LED is
flashing, press the TALK/LISTEN push-button
the change. The function is confirmed if the red LED
es off.
Automatic answer function
This function, which is only available in HANDS FREE mode,
activates the monitor audio connection automatically when a call is
received from the speech unit, without the need to push the TALK/
LISTEN button
. The "audio active" status is indicated by
illumination of the red LED
monitor, which is normally used to indicate RINGTONE MUTE.
The audio is activated automatically 5 seconds after the call is
received. To enable this function, hold down both brightness con-
trol push-buttons
(
LED
underneath starts flashing (for around 2 seconds) to
indicate entry into ADJUSTMENT mode. At this point, while the
LED is flashing, press the TALK/LISTEN push-button to confirm
the change. The function is confirmed if the red LED switches off.
To disable this function, follow the same procedure. If HANDS
FREE mode was not active during the enabling process, it will be
EN
(
and
) until the red
in the bottom left corner of the
and
) until the red
activated automatically when the AUTOMATIC ANSWER function
is enabled. If the automatic answer function is subsequently disa-
bled, the HANDS FREE function will remain active.
to confirm
switch-
8
Publicité
