Publicité
Les langues disponibles
Les langues disponibles
7200
E N G L I S H
Front panel commands and controls
A) 7" TFT LCD monitor, 16:9 widescreen aspect ratio
B) Microphone
C) Loudspeaker
D)
Pair of "
and
1) While holding down the "
" or "
" buttons to increase or decrease the
conversation volume
2) To adjust the ringtone volume, hold down either the "
" or "
" button for at least 2 seconds; then
press the buttons repeatedly to increase, decrease or mute the
ringtone volume (see point L).
E)
Pair of "
1) When the monitor is ON, the push-buttons can be used to
adjust the brightness
2) When the monitor is OFF, the buttons can be used to select
the ringtone melody for calls from a speech unit only. The
monitor has seven different melodies. To select a different
melody from the default one (ding dong dang) hold down either
the "
" or "
then press the buttons repeatedly to select the desired melody
F)
push-button: for monitor self-start on activation of
the speech unit camera (default setting). Alternatively this
button can be used to activate a second auxiliary service (e.g.
EN
" push-buttons:
" button, press the "
and
" push-buttons:
" button for at least 1 second;
a second lock).
The function of the push-button is determined by the setup
configured by the installer.
G)
push-button: for activating 1st auxiliary service, if
connected (e.g. stair lights)
H)
push-button: for door lock release
I)
push-button (talk/listen): to communicate with the
speech unit on receiving a call or after self-start. The default
conversation mode is "HANDS FREE". Alternatively the unit
can
be
set
to
push-to-talk
"Communication mode selection function").
This
push-button can also be used for monitor self-
start if the "
" push-button is used for activating a
second auxiliary function.
L)
Ringtone mute indicator: if the red LED lights up, this
indicates that the ringtone is off (see point D). Also in the case
of "HANDS FREE" communication mode, the red LED remains
on throughout the conversation, e.g. as long as the audio
connection is active
M)
Door open indicator: if the green LED lights up, this
indicates that the lock controlled by the monitor is open.
Function is determined by the setup configured by the installer.
mode
(see
paragraph
6
Publicité
