Indicator Leds - Zafferano poldina micro Mode D'emploi

INSTRUCTIONS FOR USE
SWITCHING ON / SWITCHING OFF / DIMMING
Quick taps to:
- turn on
- turn off the lamp
<1 sec
COLOR TEMPERATURE CONFIGURATION
4 sec
When the lamp is switched off, press
lightly for 4 seconds until a steady blue
LED lights up

INDICATOR LEDS

FLASHING RED LED
the battery charge is lower than 20%,
charging is recommended.
When the charge is depleted (1%), the lamp
does not switch on but emits three white flashes
as an alert to charge
Charge the battery before initial use.
To correctly charge the lamp, we recommend that you:
1) Connect the USB cable to the adaptor;
2) Put the plug into the electrical socket
3) Place the lamp on the charging base;
4) When fully charged, disconnect the plug from the electrical socket
DESIGNED BY ZAFFERANO SRL IN ITALY, MADE IN PRC • Zafferano srl, Viale dell'Industria, 26 - 31055 Quinto di Treviso - TV - Italia •
For more information and updates visit our website • www.zafferanoitalia.com
<1 sec
<1 sec <1 sec
2200K 2700K
Quick tap on the touch sensor
to change the color temperature
of the lamp
PERMANENT RED LED
charging in progress
When the lamp is switched on, lightly press the touch sensor to
obtain the desired brightness. Every time you turn it on, the light
intensity returns to 100%
<1 sec
3000K
Light pressure for 4 seconds to set
the new color temperature and switch off
the lamp
PERMANENT GREEN LED
the battery is 100% charged,
disconnection from the power charger
is recommended
4 sec
4