Product Description And Specifications - Bosch GKS Professional 18V-57 G Notice Originale

OBJ_BUCH-2769-001.book Page 17 Wednesday, January 13, 2016 4:11 PM
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for lengthways and crossways cut-
ting of wood with straight cutting lines as well as mitre cuts in
wood while resting firmly on the workpiece.
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Lock-off button for On/Off switch
2 Worklight
3 Hex key
4 Auxiliary handle (insulated gripping surface)
5 Spindle lock button
6 Base plate
7 Wing bolt for parallel guide
8 Wing bolt for bevel-angle preselection
9 Scale for mitre angle
10 Cutting mark, 45° (0° on GKS 18V-57 G)
Technical Data
Circular Saw
Article number
Rated voltage
No-load speed
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
For use with FSN guide rail system
Base plate dimensions
Saw blade diameter
Blade thickness, max.
Blade thickness, min.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
* depending on the battery pack being used
** Limited performance at temperatures <0 °C
Bosch Power Tools
11 Cutting mark, 0° (45° on GKS 18V-57 G)
12 Parallel guide
13 Retracting blade guard
14 Lever for retracting blade guard
15 Wing bolt for bevel-angle preselection
(GKS 18V-57 G)
16 Chip ejector
17 Blade guard
18 On/Off switch
19 Battery pack*
20 Handle (insulated gripping surface)
21 Saw spindle
22 Mounting flange
23 Saw blade*
24 Clamping flange
25 Clamping bolt with washer
26 Battery unlocking button*
27 Fastening screw for extraction adapter*
28 Extraction adapter*
29 Clamping lever for cutting-depth preselection
30 Cutting-depth scale
31 Set of screw clamps*
32 Button for charge-control indicator*
33 Battery charge-control indicator*
34 Guide rail*
35 Vacuum hose*
36 Connection piece*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GKS 18 V-57 G
3 601 FA2 1..
V= 18
-1
min 3400
mm 57
mm 42


mm 252 x 194
mm 165
mm 1.7
mm 1.0
mm 2.6
mm 1.7
mm 20
English | 17
GKS 18 V-57
3 601 FA2 2..
18
3400
57
39

–
188 x 138
165
1.7
1.0
2.6
1.7
20
1 609 92A 256 | (13.1.16)