Data Memorization; Alarm Setting - F1; Total Gap - F2; Add Or Silence Of The Beep Sound F3 - VISIOMED bewell connect MyThermo MicroSecond Flash BW-CX10 Guide D'installation Et D'utilisation

9.3. DATA MEMORIZATION

It is possible to follow your temperature measurement history directly on your smartphone or
tablet!
Simply press the Data Transfer button to have MyThermo instantly transfer data via Bluetooth
to the BewellConnect application.
Learn how to install and use the app by logging onto our website www.bewell-connect.com/
install.

9.4. ALARM SETTING - F1

Press on the measurement button to turn the device on.
Press the °C/°F button for 3 seconds to show the menu.
F1 appears on the screen. The alarm threshold is shown.
Alarm threshold is automatically set to on 100.4°F / 38°C. In case of higher temperature,
MyThermo BW-CX10 will emit a beep.
To change this threshold, briefly press the Mode button to decrease it or on the °C/°F button
to increase it.
Then press °C/°F button to show the next menu (F2).

9.5. TOTAL GAP - F2

To adjust the MyThermo BW-CX10 temperature gap:
Press on the button °C/°F for 3 seconds, screen will display F1.
Press again for 3 seconds, it will display F2. Then press briefly on °C/°F in order to increase the
gap by 32.2°F / 0.1°C or on Mode to diminish by 32.2°F / 0.1°C.
Confirm your new setting by pressing the °C/°F button for 3 seconds in order to show the next
menu F3.
If you're not sure, it is advised to keep the original parameter at + 32°F / +0.0°C.
For each significant change in ambient temperature between ±50 °F / ±10°C, let MyThermo
acclimate to the ambient temperature for at least 15 minutes before its use, in order to let the
device recalibrate.

9.6. ADD OR SILENCE OF THE BEEP SOUND F3

Press the measurement button to turn the device on.
Then press on the button °C/°F for 3 seconds, screen will display F1.
Press again for 3 seconds, it will display F2.
Press again for 3 seconds, it will display F3.
Press the °C/°F button or the Mode button. Screen displays 0 when the sound is inactivated
and 1 when activated.
14 BewellConnect - BW-CX10 - User Manual - 042017v3