Maintenance And Cleaning - Zeegma Puur Manuel De L'utilisateur

MAINTENANCE AND CLEANING

EN
NOTE: Make sure the device is inactive and unplugged before you
start performing maintenance works.
To fill the tank, use demineralized water only. Do not use tap water
because it may lead to accumulation of scale and in effect damage.
1.
2.
3.
4.
Storage
1.
2.
3.
4.
5.
The product complies with requirements of EU directives. Pursuant to the Directive
2012/19/EU, this product is subject to selective collection. The product must not be
disposed of along with domestic waste as it may pose a threat to the environment
and human health. The worn-out product must be handed over to the electrics and
electronics recycling center.
The pictures and diagrams are for reference only. The real design of the products may
differ from the pictures and diagrams presented.
Pour water out of the tank after every use.
Microfiber sheaths may be washed at the temperature of 30°C.
Use soft detergents. Do not use bleaches and softeners. It is
advisable to dry in the room temperature in the lying position.
To clean accessories, use water, never detergents.
Clean the main body, tube and head with a soft and dry cloth.
After the use, switch the device off and then unplug.
Take the water tank out, empty it and dry.
When all elements of the device have cooled, you can clean
them.
Clean the microfiber sheath to make it ready for another use.
Keep the device in a dry place and out of reach of children.