Set Multi; Set Iso; Set Video Length; Set Interval - Braun BLACK400phone Manuel D'instruction

4.1.14 Set Multi

This parameter affects the number of pictures taken for each triggering in the camera
mode. It has four values: "1 Photo", "3 Photos" "6 Photos" and "9 photos". Its default
value is "1 Photo". The following shows how to set photo burst to 3 Photos, provided
that the previous option is 1 Photo:
a) Press MENU to display the setting menu.
b) Press DOWN to select Multi.
c) Press RIGHT to select 3 pictures.
d) Press down the select switch to save the current setting, then press MENU to
return to info display.
e) Press MENU to cancel setting and return to info display.

4.1.15 Set ISO

This menu could only help you get a better photo at night, there are 3 values:
100,200,400.
a) Press MENU to display the setting menu.
b) Press DOWN to select ISO.
c) Press down the select switch to save the current setting, then press MENU to
return to info display.
d) Press MENU to cancel setting and exit.

4.1.16 Set Video Length

The following shows how to set video length to 30 Seconds, provided that the
previous value is 10 Seconds:
a) Press MENU to display the setting menu.
b) Press RIGHT to select Video.
c) Press DOWN to select Video Length
d) Press down the select switch to save the current setting, then press MENU to
return to info display.
e) Press MENU to cancel setting and exit.

4.1.17 Set Interval

This parameter means that how long the PIR (Passive Infrared motion sensor) will be
disabled after each triggering in ON mode. During this time the PIR of the device will
not react to the motion of human (or animals). The minimum interval is 5 seconds, it
means the PIR works all the time and media is taken almost continuously. The
maximum interval is 30 minutes, it means the PIR will be disabled for 30 minutes after
each triggering. The default value is 5 seconds.
The following shows how to set PIR Triggering Interval Time as 1 minute provided
that previous option is 5 seconds.
a) Press MENU to display the setting menu.
b) Press DOWN to select Interval.
c) Press RIGHT to enter in to the interval setting.
d) Press DOWN to select 1 minute.
20