Bluetooth Pairing - SOUND2GO MUSIC 44 Mode D'emploi

MUSIC 44

Bluetooth pairing

Before you can use playback via Bluetooth, you must
pair your player with the speaker. Procedure:
Turn the speaker on and then search for new Bluetooth
accessories with your player.
Select the device "S2GMUSIC44" and confirm the pai-
ring. If you are asked for a password, use "0000" (four
times the number zero).
Pairing mode is available for 30 seconds after the spea-
ker has been turned on. Turn the speaker off and on
again to restart it.
Cable operation with 3.5 mm stereo cable
Keep the Play/Pause button pressed to disconnect a
player connected via Bluetooth. Then you can connect
an audio source which is not Bluetooth-enabled via the
35