Braun Black400 WiFi 4K Mode D'emploi page 9

3. PIR Sensitivity
Set the sensitivity of the main sensor.
When the indoor environment is very small, "Low" shall be
selected.
When the outdoor environment is normal, "Medium" shall be
selected.
When the external environment has a great impact on the
shooting, "High" shall be selected.
4. IR LED
Option: Auto, Economy, OFF
Auto: If it is shooting night environment, it will automatically
adjust the light brightness reasonably according to the current
battery power usage.
Economy: As long as the IR LED light is turned on, the light will
be in a weaker brightness to make the battery last longer;
OFF: When it is turned off, the IR light will not be turned on when
the light is dark or completely black.
Note: It is recommended to use the "Auto" option to automatically
adjust the brightness of the IR-LED light according to the battery
power status.
5. Time Lapse
Set the time lapse of the camera. For example, to observe the
flowering process of plants, using this function and setting the
interval between each shooting, you can record the whole process
of flowering. When choosing Time Lapse, press the "OK" button to
open this menu. Selecting "ON" will pop up an Hours/Minutes/
Seconds window to set. (When this function is on, the main/
secondary sensor does not work.)
-07-