Service Notes - Revell Control DIGGER 2.0 Mode D'emploi

INSTRUCTIONS FOR SAFE DRIVING
GENERAL DRIVING TIPS:
• Always maintain visual contact with the model and do not look at the transmitter!
• On initial driving attempts, there is a general tendency toward excessive movements
ofthecontrols.Makesurethatyouhavesufficientroom.
After a crash, always release the speed control immediately in order to prevent dama-
ge to the electronics.
THE SUITABLE DRIVING ENVIRONMENT:
Thelocationinwhichthemodelisdrivenshouldfulfilthefollowingcriteria:
1. It should be a location in which there is as much open area as possible, without
disruptive obstacles.
2. Make absolutely sure when starting that there are no people or animals in the
immediate vicinity.
3. Always watch the model so that it does not drive into the operator, other people or
animals and injure them.
TROUBLESHOOTING
Problem: The model does not move.
Cause: • The battery is too weak or depleted.
Remedy: • Please charge the battery.
Problem: Transmitter does not work.
Cause:
1.The transmitter is switched off.
2.The batteries were not inserted correctly.
3.The batteries do not have enough power.
Remedy:
1.Repeat the switch-on process as described.
2.Check whether the batteries are inserted correctly.
3.Please replace with new batteries.
Problem: The model cannot be controlled with the transmitter.
Cause: 1.The transmitter is switched off
2.The connection between the transmitter and vehicle has been severed.
Remedy: 1.Move the transmitter switch to the "ON" position.
2.When the model is further than 5 metres away, move towards the model
Additional tips and trick can be found online at www.revellutions.de.

SERVICE NOTES

You can find ordering options, the online game and
useful information for all Revellutions models at
www.revellutions.de.
16
www.revellutions.de
17