Niko 10-566 Mode D'emploi page 7

10-566
Read the complete manual before attempting installation and activating the system.
1. DESCRIPTION
The base for desk mounting allows all standard monitors from the Access Control Standard range to be used as a free-standing device.
2. PARTS
Basic components
The base consists of the following components:
• Base (2 parts
• 2 + 3 screws
• RJ45 cable of 3m
3. MOUNTING
1
➥
First screw together the two parts of the base by means of the 2 screws provided. There are 3 possible positions.
2
➥
Insert the supplied cable at the back of the base.
3
➥
Then mount the mounting plate on the base by means of the 3 supplied screws.
4
➥
Connect the cable provided to the connector terminals. Note down the colour code used.
color code of the RJ45 connector
1. orange/white 5. blue/white
2. orange 6. green
3. green/white 7. brown/white
4. blue 8. brown
5
➥
Connect the other end of the cable (with RJ45 connector) to a data outlet. Connect to the system via the outlet.
6
➥
Connect the cabling and monitor as described in the manual of the monitor.
EN
1
2
3
4
5
6
7
8
slit for inserting the cable
3 positions
7