Start-Up - WAGNER SteamStation W1500 P Mode D'emploi

W1500 P
Cleaning brushes and window cleaners
•
Press down the button on the steam gun (Fig. 6, 13).
•
Attach the straight adapter (Fig. 6, 5) to the gun either with or without extensions (7).
•
Depending on what you are doing, attach the angle nozzle (Fig. 7, 10), the brushes (11)
or the window cleaner (9) to the adapter (5).
Press
6

13
7

7. Start-up

Fill the steam cleaner, but only while it is disconnected from the mains.
•
Turn the steam cap (6) in an anti-clockwise direction to remove it.
•
Fill the steam cleaner with the help of the funnel (Fig. 8, 3)
and measurement jug (2) with max. 1200 ml water.
•
Put the steam cap back on (6) and screw it shut tightly.
•
Connect it to the mains and switch the steam cleaner on.
The operating display (red) and the steam display
(orange) light up.
•
As soon as the steam display (orange) switches off, the
steam cleaner is ready to be used (depending on the
volume of water, this can take up to 7 minutes).

5
10
7
11
Press
5


5
3
8
GB
9
2
17