Technical Data - WAGNER SteamStation W1500 P Mode D'emploi

GB
•
Do not tread on the steam cleaner, hose or steam plate.
•
Do not pull or carry the steam cleaner by the cable or hose. Do not allow the cable or
hose to become jammed in a door and do not lay them around sharp edges or corners.
Keep the cable and hose away from hot surfaces.
•
If the cable or hose are damaged you must have them replaced immediately by the
manufacturer or an authorized person in order to avoid any hazards.
•
In order to protect against electric shocks, connect the steam cleaner only to earthed
mains sockets.
•
Integration of a 30 mA earth leakage circuit breaker in the power grid connection is
recommended to provide extra protection against electric shocks.
•
When using an extension cable: max.10 m long – the cable cross section must be at
least 3 x 1 mm².
•
Do not pull the plug out of the socket by the cable, but always by pulling at the plug itself.
•
Never take hold of the plug or the steam cleaner with wet hands.
•
When the steam cleaner is not being used, disconnect it from the mains. Always use the
on/off switch first and then disconnect it from the socket.
•
After use disconnect the steam cleaner from the mains and allow it to cool down before
you clean it.
•
Before you empty the steam cleaner allow it cool down completely.
•
Do not dip the electric cable, plug or steam cleaner in water or other liquids.
•
Store the steam cleaner only when it is dry and empty. Keep it in a place that is not
exposed to frost.
•
Use only WAGNER original spare parts and accessories!

2. Technical Data

Power source:
Power consumption:
Protection class
Tank capacity
Warm-up period
Operating time with one tank filling
Hose length
Length of electric cable
Weight
14
Technical Data
220-240 V
1500 W
I
1200 ml
Up to 7 minutes
Up to 30 minutes
3 m
2.5 m
approx. 5.6 kg
W1500 P
, 50-60 Hz
~