Setting Mode - Bresser Game Camera 5MP Mode D'emploi

3. This time is intended as a buffer to place the camera in the intended location. After the 10
seconds, the device will automatically start recording images.
4. In default mode the date will be set to 21/01/01. The time will be 00:00. The Camera ID will be
001. The PIR sensitivity will be Lo. The delay will be 5 minutes (before the next trigger).
5. Alternatively, to set up the camera by yourself, press any of these buttons (up, down, ENTER) to
enter Set Up mode.
6. If no SD card is inserted, a flashing "n0" is displayed on the screen. After 5 seconds, the camera
switches off. Insert the SD card and switch the unit on again.
7. To stop shooting and turn off the camera, press the ON/OFF button for about 3 seconds.

11 Setting mode

A Photo mode
c Video mode
e Micro SD card icon
Date
• YY: Press the UP or DOWN button to move to the current year, then press ENTER to confirm the
selection.
• MM: Press the UP or DOWN button to move to the current month, then press ENTER to confirm
the selection.
• DD: Press the UP or DOWN button to move to the current day and then press ENTER to confirm
the selection.
Time
• Hour: Press the UP or DOWN button to move to the current hour and then press ENTER to con-
firm the selection.
• Minute: Press the UP or DOWN button to move to the current minute, then press ENTER to con-
firm the selection.
Photo mode [a] / Video mode [c] (shown as icon [a] or [c], see figure above)
a: 5:_1 means 5MP photo x 1
5:_3 means 5MP photo x 3
20:_1 means 20MP photo x 1
20:_3 means 20MP photo x 3
c: 00:10 means 1080P video x 10 sec
b Camera ID (CAM ID)
d Battery symbol
19 / 72