Getting Started; Aux In Mode; Bluetooth Mode - Sharp GX-BT480 Mode D'emploi

Behind the port cover
11. MicroUSB Charge slot – please use supplied AC charger and USB cable,
charge time up to 3.5 hours.
12. Micro SD card slot – up to 32GB card supported MP3, WAV, APE, FLAC
audio formats, card sold separately
13. Aux in Jack 3.5mm – Aux in cable supplied
14. Carry strap hooks for use with supplied carry strap.

Getting started

Power on/off
Short press button to power on/off the speaker.
The indicator light will fl ash blue. The speaker has a memory
function and when powered will enter the same mode as prior to
power off. Each time the speaker powers on it will reset to 25%
volume.
After 10 mins with no activity/connection the GX-BT480 will
automatically power off to conserve battery.
Charging
Please use supplied AC charger and USB cable to charge the GX-
BT480. A full charge will take around 3.5 hours. Please close the
port cover after you have charged the GX-BT480.
EU US
Modes

Bluetooth Mode

A. Pairing
Power on the speaker and enter Bluetooth mode. The light
indicator will fl ash. On your smartphone search Bluetooth
devices for the "SHARP GX-BT480". Once connected the speaker
will announce it is "connected" and the indicator light will
cease fl ashing.
B. Music
► Click to play/pause
14
11
12
13
AU UK
Click for previous track
Click for next track
Click to decrease volume
Click to increase volume
C. Calls
► Click to answer an incoming call
► Click to end the active call
► Double click to reject an incoming call
D. SIRI/GOOGLE
► Double click to activate/cancel Siri/Google voice dialing.
E. Disconnect
► Press and hold to disconnect the current Bluetooth
connection. The GX-BT480 will prompt "disconnected". Then
other Bluetooth devices can fi nd and pair with the GX-BT480.
Micro SD Card Mode
When you insert a Micro SD Card into the GX-BT480 it will switch
to Micro SD card playback and announce memory card playback.
Please press the play button to commence playing music from the
card.
Please note the GX-BT480 supports Micro SD cards upto 32GB,
FAT32 format and MP3, WAV, APE, FLAC audio formats.
If you wish to switch modes please press the
► Click to play/pause
Click for previous track
Click for next track
Click to decrease volume
Click to increase volume
Notes:
– Unsupported fi le formats are skipped. For example, Word documents
(.doc) or MP3 fi les with extension .dlf are ignored and not played
– Even when the fi les are in a supported format (MP3), some
may not play or display depending on the compatibility.
– In some case, reading may be as long as 60
seconds, this is not a malfunction.
– Depending on the amount of data and media speed, it
may take longer for the unit to read the USB device.

Aux in Mode

Use the 3.5mm audio cable included to connect the speaker to an
audio source (PC, MP3/MP4, mobile phone).
Short press the button to enter "AUX IN" mode (the speaker will
prompt "Aux in" mode).
The speaker will play the music from the audio source.
► Click to mute play back
Click to decrease volume
Click to increase volume
To change or control tracks please use your music source when in
Aux in mode.
EQ
The GX-BT480 features three different EQs: Standard, Bass Boost,
Movies.
EQ - Click to change EQ settings.
The default EQ is Standard EQ. This is for use when music is already
very Bass heavy and you need to pull it back a bit. Standard EQ is
the loudest option. Bass Boost EQ will enhance the level of bass.
Movie EQ enables using the GX-BT480 as a soundbar with low
latency playback and the ability to hear the dialogue and all the
action without compromise.
EN
button.