Daikin VRV BSF4Q54TVJ Manuel D'installation page 19

2) Apply a tape (Field supply) to close the
seam so that air doesn't come inside.
1) Attach an
insulation tube.
Insulation tube
(Field supply)
(attached to unit)
Insulation material installation instructions
(outdoor unit side)
(High/low pressure gas, suction and liquid pipes)
Unit
Adhere
Insulation tube installation instructions
(indoor unit side) (gas and liquid pipes)
• If the installation environment is high temperature and high humidity, reinforce the insulation of high/low
pressure, suction gas pipes (outdoor unit side) and gas pipes (indoor unit side). Refer below for how to
attach the insulation materials.
3) Apply a tape (Field supply) to
Insulation material installation instructions at high tempera-
ture and high humidity (High/low pressure gas, suction
pipes) (Outdoor unit side) (Gas pipes) (Indoor unit side)
English
Unit
Adhere Adhere
3) Use the clamps
(Accessory (1)) to
hold both ends.
1) Attach an
insulation tube.
(Field supply)
2) Attach the insulation tube.
(Accessory (2))
(2)-1 Liquid pipe
(2)-2 Gas pipe
close the seam so that air
doesn't come inside.
1) Attach an
Adhere Adhere
insulation tube.
(Field supply)
3) Use a clamp (Field supply)
to close the end of insulation tube
so that air doesn't come inside.
1) Attach an
Stopper pipe (outdoor unit side)
insulation
(Accessory (6))
tube.
(6)-1 High/low pressure and suction gas pipe
(Field supply)
(6)-2 Liquid pipe
Insulation material installation instructions
for stopper pipes (outdoor unit side)
(High/low pressure gas, suction and liquid pipes)
Stopper pipe (Accessory (4))
(4)-1 Liquid pipe
(4)-2 Gas pipe
Unit
Adhere
Insulation tube installation instructions for unused branch ports
(indoor unit side) (gas and liquid pipes)
2) Attach an insulation tube
(Field supply) to fi ll the gap.
Insulation tube
(attached to unit)
Unit Unit
2) Apply a tape (Field
supply) to close the
seam so that air
doesn't come inside.
Unit
Adhere Adhere
Insulation tube
(attached to unit)
3) Use the clamps
(Accessory (1)) to hold both
ends.
1) Attach the
insulation tube
for stopper pipe.
(Accessory (5))
(5)-1 Liquid pipe
(5)-2 Gas pipe
2) Attach the insulation tube.
(Accessory (2))
(2)-1 Liquid pipe
(2)-2 Gas pipe
16