HOLL'S Venetian hybride Manuel D'installation page 10

Assemble instructions Assemble instructions
* After checking that the sauna is working correctly, we recommend that you screw the ceiling's plywood sheet tight to the upper
panel. As the sauna can reach very high temperatures, this part can often exhibit variations in shape, especially at the corners.
Important: The screws must be removed if you need to carry out maintenance.
10
Step 7
After moving the cables outside the cabin, carefully po-
sition the ceiling over the cabin so as not to damage the
temperature sensor.
Pass the cables into the ceiling via
the openings provided.
Step 8
Connect the cables to the control box in accordance with
their coding (Cable A. Load A, Cable B. Load B, etc.).
The remaining cables must be connected in accordance
with the number of pins on each connector.
Once the connections are complete, position the protec-
tive plywood sheet on the ceiling.*
Some cables do not connect to any-
thing depending on the options avai-
lable in your cabin.
Step 9
On the outside of the door, position the handle in line with
the holes provided.
Insert the screws through the inside
of the door and fix the handle. The
metal part must be on the outside of
the cabin. (depending on model)