Briteq LD SMART DIM Mode D'emploi page 10

ENGLISH
Sequence mode
The sequence mode runs the desired scenes in loop.
The scenes should be recorded previously.
Playback sequence:
1. Press the "Sequence" button
2. Turn the jog wheel to adjust the dimmer
3. Press MODE button to change the fade speed. The fade LED = on
4. Press the desired scene buttons, for example : 1, 5, 2, 4
5. All selected scene LEDs will light up in blue, the current playback scene lights up in green.
6. Turn the jog wheel to set the fade speed.
7. The LD–SMART DIM play the sequence with the selected scenes: 1, 5, 2, 4
The scenes 3 and 6 are not used.
To go back in static mode or fade mode, press on the "Sequence" button
SPECIFICATIONS
Power Input:
AC/DC Power adapter:
DMX connections:
BUS connections:
Max. units on the data bus:
DMX start addresses:
Audio input:
Size:
Weight:
You can download the latest version of this user manual on our website: www.beglec.com
BRITEQ
®
DC 12V 300mA minimum.
AC 230V, 50Hz  12Vdc / 300mA (or more)
3pin push terminals
5pin push terminals
8
Zone1 :1
Zone2 :5
Zone3 :9
Zone4 :13
Zone5 :17
Zone6 :21
None
87 x 87 x 38cm
0.15kg
Every information is subject to change without prior notice
8/44
OPERATION MANUAL
LD-SMART DIM