Trouble Shooting - LG LCV701R Manuel Du Propriétaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Trouble Shooting

Review this chart to find do-it-yourself solutions for minor performance problems.
Any service or repair needed, other than as described in this User's Guide, should be performed through
your local LGE service center.
Electrical shock and personal injury hazard.
Always unplug the vacuum cleaner before servicing. Failure to do so could result in electrical shock or personal
injury.
PROBLEM
Vacuum cleaner will not run • Unplugged at wall outlet
Poor suction
Is the noise louder than
usual?
Smell
Agitator does not turn
16
WARNING
POSSIBLE CAUSE
• Hose is not connected to the
body properly
• Full or clogged dust tank and
filters
• Dust tank improperly installed
• Clogged hose or wand
• Clogged nozzle
• Full or clogged dust tank and
filters
• Dust tank improperly installed
• Clogged hose or wand
• Clogged nozzle
• Clogged hose or wand
• Clogged nozzle
• Smell as the motor spins fast
around the surrounding rubber
• The filters of dust separator
with dust is old or stored for a
long time
• Clogged nozzle
• Pedal improperly positioned.
POSSIBLE SOLUTION
• Make sure cord is plugged into a
functioning outlet.
• Remove the hose from the body and
reconnect it properly. [See page 7]
• Empty dust tank and clean filters.
[See page 11 ~ 14]
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs. [See page 15]
• Empty dust tank and clean filters.
[See page 11 ~ 14]
• Make sure all dust tank components and
filters are installed correctly.
• Check for clogs. [See page 15]
• Check for clogs. [See page 15]
• It's the smells from new vacuum cleaner.
The smell disappears after 1-2 months. It's
like the smells from a new car or furniture
• Empty dust tank and clean filters.
[See page 11 ~ 14]
• Check for clogs. [See page 15]
• Check the pedal position [See page 9]

Publicité

Chapitres

Table des Matières
loading

Table des Matières