EN
INSTRUCTIONS
Place the child seat forward facing on the vehicle seat (in the direction of
travel).
Put the ISOFIX insert guide into the two ISOFIX attachment points of your
vehicle.
NOTE:The ISOFIX attachment points are located between the surface and
the backrest of the vehicle seat.
Press the ISOFIX button to pull out the two locking arms from the base
bottom. Pull the locking arm to and fro until you hear an audible CLICK which
indicates they are fully engaged. And on both sides
3
INSTALLED WITH ISOFIX AND
BELT
Stepl:First pull out the belt from
the belt ALR Diagonal belt through
Guidance 1 and lap belt through the
belt slot, then put them together
through Guidance 3 slot.
NOTE: Make sure that the diagonal
seatbelt section runs over your
child's shoulder bone, and not in
front of his or her neck.
Step2: Lock the tip of the buckle into
the vehicle seat buckle with a CLICK
noise. Follow the direction of arrow
to tighten belt, and put redundant
belt into cloth cover.Shake the child
safety car seat to make sure it is
securely attached.
CAUTION! The diagonal seat belt
section must