BH EASY motion STAND UP Manuel De L'utilisateur page 44

See section: Torque Value
Check your brake cables once a month to ensure that they are not twisted or
rusted, that there are no broken threads or ends, and check their casings for
cuts or wear. Substitute any defective piece.
AJUSTMENT
-
How to regulate the cable tension use the tensor (T) and fix it with the
locknut
-
How to adjust the separation between pad with respect to the disc:
Turn the pad's adjustment screw. (A). To increase the separation, turn it
counterclockwise.
To reduce the distance, turn it clockwise.
How to align the brake with the disc: Loosen the brake mount bolts (P).
Squeeze the lever completely and gradually tighten the bolts.
-
How to remove the brake shoes: the pincer shall be taken out and with
the fingers or thin-nosed pliers, grip the tab of the brake shoes and pull it.
A: Adjuster nut, (set in the inside face).
P: Assembling bolts of the pincer
T: Tensor
F: Fitting screw cable.
S: Assembling bolts to the fork.
Important: The brake lever corresponds to the front Wheel.
The battery is one of the most important part of the STAND UP. Please, make a
correct use.
STAND UP provides a
The battery can provide 300 chargers approximately.
11. BATTERY AND CHARGE
LITHIUM-ION battery with 48V / 12Ah