Description - Ramiaudio FDI1000 Manuel Utilisateur

DESCRIPTION

FDI1000 is inted to solve all interface problems between various equipments.
It allows :
Interface of logical signals from mixing desk and sound machines

Interface of GPI signal and sound machines.

Transforms 5V TLL to dry loops.

Sharing of dry loops.

Mutiplication of dry loops.

Insulation between control signal and equipement (really useful when the equipements have

a common potential).
Translate hold to pulse signal.

The cell configuration uses front panel dip switches. The configuration can be for only one cell or
shared between more cells (LINK), allowing remote control of several equipement by the same order.
A TEST facility, simulate an order, to check the cell settings, allowing problem detection. Two front
panel leds show the cell state.
Command input uses an opto coupler, working with dry loop or voltage (3 to 24V DC) A positive
power supply and ground are available on the input connector.
To ease connection, inputs an outputs use removable screw connectors.
Rami 12 FDI1000