Kerbl AVLink Set 1092 Mode D'emploi page 16

Introduction
EN
Thanks to the purchase of Kerbl's AVLink Set. This device is designed to relay 2.4 GHz wireless analog audio/video signals so that normal
2.4 GHz analog wireless camera can transmit signals much further or bypass the obstacles between. Theoretically each AVLink Set can
extend transmission distance up to 300 meters at a clear line of sight (when use Yagi antennas it can be up to 1200 m) and is compatible
with all Kerbl equipment.
Please be aware that we use an open frequency and that the signal is not encrypted. This means that the signal can be captured by another
2,4 GHz device within the transmission range.
The product is CE- and FCC certified which means that it fulfils all established rules and demands for usage within the EU and USA. This
device has been marketed in accordance with the R&TTE Directive 1999/5/EC and may be used throughout the European Union and
Switzerland. For further information please have a look at the declaration of conformity.
Please consider also the following important informations:
• Before using the AVLink Set please read carefully the instruction manual.
• Check carefully the cables and the connectivity to the devices.
• Never open the housing of any device – please return broken devices to your dealer
• Don´t use aggressive chemicals in order to clean your devices
• Do not use the products in sensible places like hospitals or airplanes since they might interfere with sensitive equipment.
• Respect the rights of third parties.
• Follow the laws and legislations that apply in your country.
• Do not leave packaging material near children to avoid the risk of suffocation.
• Do not cover or place the power adaptors on heat sensitive materials.
• Do not lift the AVLink using its antennas.
• Do not use several AVLinks with the same frequency within the same area since they will interfere with each other.
Albert Kerbl GmbH resigns all responsibility that might occur from abuse or incorrect usage of the products. Always follow the instructions
in this User Guide
Content of AVLink Set
The Set includes the following key parts:
1. 1 T connector with male head
2. 1 Connector with female head
3. 2 Flat panel antennas. (For receiving & transmitting 5 dBi)
4. 1 AVLink for signal repeating, 4 channels adjustable. (Art. nr 1092)
5. 1 Antenna cable (25 m) for connection between AVLink and transmitting antenna (Art. nr 1073)
6. 1 Flat antenna holder to hold flat antenna on a mounting foot
7. 1 5V power adaptor for AVLink
8. 1 Mounting foot for flat antenna
9. 1 AV cable for connection of the AVLink to your TV (Yellow/Red)
10. 1 User's Guide
11. 1 Mounting hardware for mounting foot of flat antenna
16