Symbols; General Power Tool Safety Warnings; Work Area; Electrical Safety - VARO Powerplus POWDPG7561 Utilisation Et Entretien

4 SYMBOLS

In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the tool.
Read instructions carefully.
Wear safety glasses and
ear protection.
Never operate the machine
in the rain or in damp or wet
condition. Moisture is a
shock hazard.
class III - tool in which
protection against electric
shock relies on supply at
safety extra-low voltage and
in which voltages higher
than those of safety extra-
low voltages are not
generated
Do not expose charger and
battery pack to water.
Ambient temperature 40 °C
max. (only for battery).

5 GENERAL POWER TOOL SAFETY WARNINGS

Read all safety warnings and all instructions. Failure to follow all warnings
and instructions may result in electric shock, fire and/or serious injury. Save
all warnings and instructions for future reference. The term "power tool" in
the warnings refers to your mains operated (corded) power tool or battery
operated (cordless) power tool.
5.1

Work area

▪
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
▪
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
▪
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2

Electrical safety

▪
Always check that the power supply corresponds to the voltage on the rating plate.
Copyright © 2020 VARO
POWDPG75410
P a g e | 4
Wearing of protective shoes
advised.
Wear gloves.
Keep a minimum distance of
15 m between the machine
and third parties during use.
Wear a mask in dusty
conditions.
In accordance with essential
requirements of the European
directive(s).
Do not incinerate battery
pack or charger.
Use battery and charger only
in closed rooms.
www.varo.com
EN