Daewoo DMF-4010S Mode D'emploi page 5

Product instruc on
Insert the power cord into plug socket with rated power 220-240V~ 50Hz before use
Control Panel
1. Insert the power cord into plug socket, and hear "beep" sound a er power is
connected work as shown above, use remote control point to receive window and
push any bu on, various func ons work accordingly.
2. ON/OFFBu on
First me push ON/OFF bu on, the indicator light is on and push it again, the
speed is in the low Level.
3. SPEEDBu on: This bu on can control fan speed by low/Mid/High.
4. TIMER Bu on: first push, the environment temperature shows 01H then goes
to 12H in turn, then mer stops working a er push it again. When mer works,
room temperature displays.
5. ION Bu on: Push this bu on, light of Ion func on is on, push it again ION func on
off.
6. Mode bu on: first push the bu on, nature mode light is on. Push again, light of
sleep mode Is on, push it third mes, normal mode works.
7. Mosquito Bu on: push the bu on, red light of mosquito repellent on. Press again
light off.
8. 0SC Bu on: Push the bu on, light of OSC on. Press again light off.
9. MIST Bu on: Push the bu on at first me, light of humidifier on, push again,
medium light on, large light on then light off and so on (indicator light of body shell
is blue when is normal, when lack of water light is red.)
10. A er power on, first push ON/OFFthen MIST bu on, it works same as point 9.
Remote control
5