Daewoo DMF-4010S Mode D'emploi page 4

According to above installa on diagram, please follow the installa on:
First check every part is ready before installa on.
Step1: First install the five castors (19) on the base (18).
Step2: Install the body (15) into the base (18), then use the base lock (20) to screw
on the base ghtly.
Step3: Put stanchion pole (11) into fan body (15), and fix connec on terminal (12),
then fasten by handle screw (13).
Step4: Install the rear guard (6) onto the motor sha (8) then use guard lock (5) to
fasten.
Step5: Install the fan leaf (4) onto the motor sha , then screw it.
Step6: Install decora on ring (1) on the front guard (2) and screw.
Step7: Put the front guard (2) and rear guard (6) together, and use screw to fasten
decora on ring.
Step8: Pull the mist pole through into decora on ring (1). Installa on is complete.
Humidifier
Push the water tank upward, remove tank, unscrew the cap and fill with water to a
suitable level, the temperature of water should not above 40°C, screw the cap and dry
the tank surface.
4