British Fires NEW FOREST ELECTRIC Guide D'installation Et Mode D'emploi page 15

// 10.0 FOREST VIEW FUEL BED LAYOUT
Taking a small account of the small crystals, scatter randomly over the
frosted base as shown above.
PRO TIP – Use the small crystals to pick up extra light from the fuel bed to give you the best effect.
Use the contents from the Forest terrain bag and place this in the
formation shown above (image 2) towards the front and sides of the
frosted base. There should be a single layer to cover this area of the
frosted bed and the crystals still visible.
Using the contents from the Husk bag, cover the area on the frosted
bed that is still exposed, making sure the crystals are still visible.
// 23
1
Use the slate pieces and place these randomly on the bed as shown in
image 4, above.
2
Place the logs on top of the base layer created by the crystals, Forest
3
terrain, Husk and slate pieces. Position them as shown above. The logs
can be placed in any order, for this look the larger logs are in the center
with the remaining logs around them.
IMPORTANT – Place the logs carefully on the fuel bed so you do not make contact with the rear and side
glass. Contact with glass may cause damage.
4
5
© 2020 British Fires // 24