Minebea Intec YDO01C-232 Notice D'installation page 14

Confi guring the UniCOM Interface
Configuring the UniCOM Interface
Configuring Combics 1 and Combics 2 Models
Operating Menu Overview for the UniCOM Interface
(also refer to the operating menu overview in the Combics operating instructions, in the chapter entitled "Operating the Combics")
Appl
Fn-Key
Setup WP1
COM1
UniCOM
* = Factory setting
1
) Not on Combics 1 models
YDO01C
14
Off *
1
WP2 ) RS-232
RS-485
Data protocol SBI *
XBPI-232
XBPI-485
SMA
Profibus
Ethernet
Printer YDP01IS
YDP02
YDP03
YDP02IS
UNIVERSAL (universal printer)
YDP04IS
YAM01IS (Alibi memory)
Analog output
SBI standard version
SBI trade version
XBPI-232 *
ADC-232
IS-485 *
ADC-485
Addr. 0
...
Addr. 126 *
Source IP: 192.168.0.1 *
Source name
Listen port: 49155 *
Subnet mask:255.255.255.0 *
Gateway IP: 0.0.0.0 *
DNS IP: 0.0.0.0 *
Target IP: 0.0.0.0 *
Target port: 49155 *
Protocol TCP *
UDP
Mode SBI *
xBPI
SMA
Modbus/TCP
Line *
Label
Label, man. form feed
Line *
Label
Line *
Label
Label, man. form feed
6. 1. Data output/printout,
manual/automatic
6. 1. 1 Manual without stability
6. 1. 2 * Manual after stability
6. 1. 4 Automatic without stability
6. 1. 5 Automatic at stability
6. 1. 7 Output of record to PC
6. 3. Time-dependent automatic output
6. 3. 1 * 1 display update
6. 3. 2 2 display updates
6. 3. 4 10 display updates
6. 3. 7 100 display updates
7. 2. Data output: line format
7. 2. 1 For raw data: 16 characters
7. 2. 2 * For other apps: 22 characters